What needs to be done for the maintenance of automatic dispensing machine equipment?
Release time:
2023-08-08
Source:
The daily maintenance of automatic dispensing machines is related to their service life. After the daily operation of the automatic dispensing machine, it should be well maintained. How to maintain an automatic dispensing machine? Here are the correct daily maintenance steps taught by Keqi:
1. Replace the rubber and clean the pipeline. At this point, first close the supply valve, open the discharge valve, discharge the remaining rubber material from the rubber bucket, close the discharge valve, open the supply valve, inject the cleaning solvent into the rubber storage bucket, activate the body, and clean according to the normal operation mode of the solvent.
If the intake is abnormal and there is water vapor, please remove the water vapor from the pressure regulating filter or check if the pressure source is abnormal. Before using the automatic dispensing machine, please try a small amount to master the skills of using the product, prevent errors, and conduct experiments without problems. Then, use a double liquid drip machine or double liquid dispensing machine for mass production; The vacuum cleaning system performs vacuum treatment to eliminate the bubbles generated during the mixing process, or uses a pre station for 10-20 minutes to mix the bubbles generated during the mixing process in a timely manner, with more glue.
Please clean the machine regularly to improve its service life. The more glue is mixed, the faster the reaction rate and curing rate. Therefore, based on the specific production situation of reasonable glue, otherwise it will lead to glue waste. Eliminate accidents and improve production efficiency with glue spraying machines.
Previous Page
Contact Us
Tel: +86-769-81623860
Fax: +86-769-8162 3029
Email: info@keqi-auto.com
Web: www.keqi-auto.com
Follow Us
COPYRIGHT©2024 KQ Auto All Rights Reserved SEO | Privacy Policy